SS410 Forging Ingots
Type 410 martensitic stainless steel. A hardenable stainless steel with moderate corrosion resistance and good strength.
SS410 chemical composition
| C | 0.15 max % |
|---|---|
| Si | 1.00 max % |
| Mn | 1.00 max % |
| Cr | 11.5 – 13.5 % |
| P | 0.040 max % |
| S | 0.030 max % |
Indicative ranges from the common grade standard. The final analysis is as per the order and the heat test certificate.
Equivalent grades
X12Cr13 / 1.4006 · 410S21 approx.
Equivalents are approximate. See the grade equivalents guide.
SS410 as a forging ingot
410 stainless forging ingots are used for forged valve and pump components.
Kesari Alloys casts SS410 in square, fluted and round shapes from M1.5 to M22, with vacuum degassing, ladle refining and bottom pouring. See the ingot size chart for dimensions and weights.
Heat treatment: Hardened and tempered. Strength depends on tempering temperature.
SS410 ingot manufacturer and supplier
As a SS410 forging ingot manufacturer and SS410 steel ingot manufacturer, Kesari Alloys casts SS410 in square, fluted and round shapes. We are also a SS410 steel ingot supplier India forging shops can enquire with, a SS410ingot supplier India wide, and a SS410 ingot manufacturer India customers can visit at the Bhiwadi plant.
Typical forged parts in SS410
- Valve trim and stems
- Pump shafts
- Turbine parts
- Fasteners and cutlery-grade parts
Applications: flanges and forged rings, valve bodies.
Related grades
SS410 questions
What is SS410 steel used for?
SS410 is used for valve trim and stems, pump shafts, turbine parts, fasteners and cutlery-grade parts.
What is the equivalent of SS410?
X12Cr13 / 1.4006 · 410S21 approx.. Equivalents are approximate, so check the limits in your specification.
Does Kesari Alloys supply SS410 forging ingots?
Yes. SS410 is available as square, fluted or round forging ingots, vacuum degassed and bottom poured. Send the size, quantity and standard to info@ksl.in for a quotation.